AUTDOME 4000 Mini
PTZ Dome
7
On-Screen Display (OSD) Menu
Notice!
Before beginning this section of the manual, you must install
and connect the camera to an interface device. Refer to the
Mounting Manual. Once you have installed the camera, apply
power to the camera.
When the camera is powered-up, the start-up screen appears on
the monitor.
VEZ-400 MINI PTZ
DOME
RS-485/9600
ID001
CAM TEST ...PASS
7.1
Basic Navigation and Common Actions
Camera operators can operate the camera by two methods:
–
–
The following table identifies the symbols that depict actions of
the joystick controller, or the keys on the keyboard, that control
the camera.
Bosch Security Systems, Inc.
Use of hot keys [Refer to Bosch Protocol, page 84].
Use of the OSD Menu displayed on the monitor [Continue
to read this chapter].
On-Screen Display (OSD) Menu | en
39
2013.4 | |