AUTDOME 4000 Mini
PTZ Dome
SCAN SETUP
SPEED
DTIME
DIRECTION
MODE
CLEAR
SAVE
BACK
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Select the option "Speed."
11. Select the desired speed (from 1° to 35°/second).
12. Select the option "DTime" to set the dwell time for the
13. Set the desired time (from 3 minute to 60 seconds).
14. Select the option "Direction."
15. Select the appropriate value for the direction of the scan.
Bosch Security Systems, Inc.
Select the option "NO.###" to select a scan number.
Select the appropriate scan number.
Select the option "Edit."
Select the value "Edit Start Point." The screen Start
Position Setup appears.
Using the joystick, move to a desired target (Pan/Tilt/Zoom)
for the starting point of the scan.
Save the settings. The screen Stop Position Setup appears.
Using the joystick, move to a desired target (Pan/Tilt/Zoom)
for the stopping point of the scan.
Save the settings.
Return to the previous screen.
scan.
On-Screen Display (OSD) Menu | en
73
2013.4 | |