Appendix C Bios Flash Utility - Leadtek WinFast 6200MA User Manual

Appendix C BIOS Flash Utility

If you get a new Floppy Diskette or CD_ROM from your local dealer
that contains a new version of the BIOS binary file or you obtain
the new BIOS binary file directly from our Web Site (www.leadtek.com.tw)
Please follow the steps described below to update the BIOS.
Step 1 Reboot into DOS environment or "Command Prompt Only" of Windows95/98
Step 2 Insert the accompany CD into CD-ROM (or floppy disk to Drive A)
Step 3 Copy "AWDFLASH.EXE" to a new directory from X:\FLASH
sub-directory. (X: means CD-ROM drive letter)
Step 4 Copy the new BIOS binary file to the above said new directory
Step 5 Change to the new directory and type the following command:
AWDFLASH [Filename] ([Filename] means the file name of BIOS
binary file.)
A message will be displayed on your screen and just follows the instruction
to finish the BIOS updating.
You can also use "AWDFLASH /?" command to get help messages.
Warning: It is recommended that the application to be run under DOS
prompt. In Windows 95/98, please do following: Start your system
when "Starting Windows 95 (or 98)...." message appear, press F8
immediately to enter the "Startup Menu" and then select the "Command
Prompt Only" option.
®
WinFast 6200MA User's Manual
53