Supervisor Password; User Password; Onfiguration - Leadtek WinFast 6200MA User Manual

USB Keyboard Support
Choose "Enabled" if you use USB Keyboard.
The choice: Enabled, Disabled.
Init Display First
When select PCI Slot the system will initial the PCI VGA card first. If there are no PCI VGA
cards then the system will initial onboard Super AGP VGA.
When select AGP the system will initial from on board Super AGP VGA.
The choice: PCI slot, AGP
VGA Shared Memory Size
Specify the size of system memory to allocate for video memory, from 512 KB to 4 MB.
Current SYSFAN,CPUFAN Speed
These fields display the current speed of system and CPU fans.
+5V, +2.5V, +3.3V, Vcore
These fields display the current voltage of +5.5V, +3.3V, +2.5V and Vcore.
4-10

Supervisor Password

4-11

User Password

Passwords can be set to provide protection for the BIOS configuration options, or to
restrict access to the computer itself.
When enabled, User Password will require all users to enter a password in order to
use the system, and/or enter the BIOS setup (but can't change its contents). A
Supervisor Password is used to protect the stored CMOS options from being changed
by unauthorized users.
Keep in mind that when set, a password is required only when booting the system. It
will not provide protection to a system that is already booted.
The password check option is set in BIOS FEATURES SETUP by choosing either
System (the password prompt appears every time the system is powered on) or Setup
(the password prompt appears only when the user enters the BIOS Setup). The
password is stored in CMOS RAM, and can be cleared by removing the battery for a
while and then re-installing it back.
To set a password:
1. You must first set the Supervisor password by choosing Supervisor
Password and pressing [ENTER]. Setup prompts for a password.
2. Enter a 1-8 character password using letters, numbers, or a combination of
both. The specific characters are not shown as you enter them. Press
[ENTER].
3. A confirmation box appears asking you to re-enter the password. Enter the
password again. Press [ENTER]. Follow the same procedure to set the User
Password.
Changing a Password:
®
WinFast 6200MA User's Manual
39