Leadtek WinFast 6200MA User Manual page 30

Leadtek Research Inc.
Typematic Rate Setting
When disabled, continually holding down a key on your keyboard, system will use the default
typematic rate delay of 250 msec and typematic rate of 6 chars/sec to repeatedly input. When
enabled you can adjust both settings. For example, you could use such a feature to accelerate
cursor movements with the arrow keys.
Enabled Enable typematic rate setting
Disabled Disable typematic rate setting
Typematic Rate (Chars/Sec)
When "Typematic Rate Setting" is enabled, these selections allow you to select the rate at which
character repeats when you hold down a key.
6 6 characters per second
8 8 characters per second
10 10 characters per second
12 12 characters per second
15 15 characters per second
20 20 characters per second
24 24 characters per second
30 30 characters per second
Typematic Delay (Msec)
When "Typematic Rate Setting" is enabled, these selections allow you to select the delay before
key strokes begin to repeat.
250 (default) 250 msec
500 500 msec
750 750 msec
1000 1000 msec
Security Option
If you have set a password at USER PASSWORD option in main menu, select whether the
password is required every time the System boots, or only when you enter Setup.
The choice: System, Setup.
PCI / VGA Palette Snoop
When MPEG ISA/VESA VGA Cards can not work smoothly with PCI/VGA card, select
Enabled otherwise leave at Disabled.
OS Select for DRAM > 64MB
This item allows you to access memory that is over 64MB in OS/2. Choose OS2 when you are
using OS2 and SDRAM size greater than 64 MB. For other operating systems choose Non-OS2.
The choice: Non-OS2, OS2.
Report No FDD for Win95
Select Yes to release IRQ6 when the system contains no floppy drive, for compatibility with
Windows 95 logo certification. In the Integrated Peripherals screen, select Disabled for the
Onboard FDC Controller field. You should choose "Yes" if your operating system is Windows
95 and without a floppy disk equipped in your computer.
The choice: Yes/No
Shadow
Software that resides in a read-only memory (ROM) chip on a device is called "firmware". The
26