Creating A New Remote Connection - Honeywell FUSION III DVR User Manual

13.3.2 CREATING A NEW REMOTE CONNECTION

8
1
2
3
4
5
6
7
8
1. Select Start
The Honeywell Fusion Center Software opens and a Site Connection List window
opens.
2. Press New to open the Site Detail Information window.
3. Enter the Site Code and Site Name. The Site Code will be the name displayed
inside the connection box to help identify the unit.
4. Enter the IP Address of the DVR server.
By default the DVR unit is set to connect using DHCP.
5. Enter the Center Port. This setting is specified on the server (See Section 13.2.)
6. Press OK.
7. Click on the newly created connection and enter the login username and
password.
8. Press Connect.
7
Creates a new site to connect to.
New
Deletes the selected site once it is selected from the list.
Delete
Deletes all listed sites.
Delete All
Used to edit a site once it is selected from the list.
Edit
Enter the logon password.
Password
Connects the Fusion Remote Client to the Server.
Connect
Enter the Login Username.
User
Displays a list of pre-configured sites.
Site
Programs
6
DVR Center DVR Center.
REMOTE SOFTWARE
1
2
3
4
5
13–5