Performing An Object Search - Honeywell FUSION III DVR User Manual

6.15.1 PERFORMING AN OBJECT SEARCH

1. Select a single camera, either by turning off all cameras but one or by double-
clicking a displayed image.
2. Select the Object Search button.
3. Create a motion region box on the image by clicking inside the image and holding
down the left mouse button while dragging the pointer. When the desired shape is
created, let go of the mouse button. Only one motion region box can be created.
To delete the motion region box, press the Clear Selection button.
4. Press the Start Search button. The Object Filter Search information should open.
5. Select an end time. One hour is the default setting.
6. Adjust the sensitivity if necessary.
7. Click OK to begin the search. When results are found, they will be displayed in the
column to the right. If no results are found, the search will end and "No Images
Found" will display in the column. Press Stop to stop a search.
8. When the search has ended, double-click on one of the results. Use the up and
down arrows to scroll through the results quickly.
9. When the desired image is found, select Apply to Main Search to use the play
controls.
SEARCH OPTIONS
6–17