Table of Contents
Advertisement
Web Pages
12.4.1
IP Address Configuration Page
Overview
Click on the "IP Address" tab on the Network Configuration page.
Only the user with Admin Access will be able to change configurations on this page. User logged in as
Guest will only be able to view the configurations. IP address configuration for the UDA can be done from
this page.
This page will display the existing configurations of the device which can be changed by a user with
Admin access. So if the UDA is already using a dynamic IP the radio button for this choice is selected. In
case of dynamic IP the field for Static IP will be displayed as empty.
Setting a Static IP
If the static IP address is already assigned to the UDA then the existing settings are displayed on this page.
Step
1
Select the radio button which says "Use the following IP address"
Enter the IP address, subnet mask, default gateway and the DNS server IP as per the local network
2
settings.
All the octets for the IP addresses must be less than 256.
If you will be using an SMTP server name, i.e. smtp.honeywell.com, rather than an IP address, you will
need to enter the DNS Server IP address. Note: if DHCP is used, this step can be skipped because
the DNS server will automatically configure the DNS Server IP address.
To configure the address, type it into the edit boxes then press Configure.
3
If you need to reset the entries back to the actual values, press the Reset button before pressing the
configure button.
4
Press the
Note: after you change the IP address, and press Log Off, you will need to change the IP address in
your browser to access the UDA with its new IP address.
42
Figure 12-4 IP Address Configuration
Table 12-1 Setting a Static IP Address
tab on the left hand menu. The IP address configuration will take effect
UDA2182 Communications User Guide
Action
January 09
Hide quick links:
Advertisement
Table of Contents
