Add Alarm Recipient Configuration Page; Table 12-3 Adding An Alarm Recipient; Figure 12-6 Add Alarm Recipient - Honeywell UDA2182 User Manual

Web Pages

12.4.3 Add Alarm Recipient Configuration Page

Overview
Click on the "Add Alarm Recipient" tab on the Network Configuration page.
You can assign alarm alerts to be sent to a particular email address.
Only the user with Admin Access will be able to change configurations on this page. User logged in as
Guest will only be able to view the configurations.
Adding an Alarm Recipient
Up to 8 Alarm Recipients can be configured. Whenever the Alarm's state changes, the recipients will
reveive alarm alerts for the alarms for which they have subscribed.
Step
Enter the email address of the alarm recipient in the text box. The address should not exceed 255
1
characters.
Click on the boxes to select the Alarms for which the recipient wants to subscribe. A recipient can
2
subscribe to any number of alarms.
Press "Configure" to add the alarm recipient to the table of configured alarm recipients.
3
Note: If already 8 alarm recipients are entered, a new entry will replace the first entry in the table.
To Delete any of the Alarm recipients, select the appropriate boxes, then press the "Delete" button.
4
4
Press the
44

Figure 12-6 Add Alarm Recipient

Table 12-3 Adding an Alarm Recipient

tab on the left hand menu.
UDA2182 Communications User Guide
Action
January 09