Multitech MultiModem
MT5634ZBA-V-V92 User Manual page 44

MultiModemZBA-V-V92 User Guide
Command:
Values:
Default:
Description:
Command:
Values:
Default:
Description:
Command:
Values:
Default:
Description:
Command: +++AT<CR> Escape Sequence
Values:
Description:
Command: %%%AT<CR> Remote Configuration Escape Sequence
Values:
Description:
4 AT Commands, S-Registers, & Result Codes
#P n Set 11-bit Parity
n = 0 or 1
2
#P0 No parity.
#P1 Odd parity.
#P2 Even parity.
#S x Enter Setup Password
x = password (1–8 characters, case sensitive)
MTSMODEM
Enters the callback security setup password.
#S= x Store Setup Password
x = password (1–8 characters, case sensitive)
MTSMODEM
Stores a new callback security and remote configuration setup
password.
n/a
Puts the modem in command mode (and optionally issues a
command) while remaining online. Type +++AT and up to six
command characters, then press ENTER. Used mostly to issue
the hang-up command: +++ATH<CR>.
n/a
Initiates remote configuration mode while online with remote
modem. The remote configuration escape character (%) is de-
fined in register S13.
39