Multitech MultiModem
MT5634ZBA-V-V92 User Manual page 35

MultiModemZBA-V-V92 User Guide
Command:
Values:
Default:
Description:
Command:
Values:
Default:
Description:
Command:
Values:
Default:
Description:
Command:
Values:
Default:
Description:
Command:
Values:
Default:
Description:
Command:
Values:
Default:
Description: $SB300
4 AT Commands, S-Registers, & Result Codes
%H n Direct Connect Enable
n = 0, 1
0
%H0 Sets callback security to normal operation.
%H1 All callback security calls will be direct connect regardless of
whether the password or phone number has the - character.
%R n Cisco Configuration
n = 0, 1
0
%R0 Disables Cisco configuration.
%R1 Sets E0, Q1, &D0, \N0, $SB9600, and %S1 for operation with
a Cisco router.
%S n Command Speed Response
n = 0, 1
0
%S0 Sets modem to respond to AT commands at all normal speeds.
%S1 AT commands accepted at 115200 bps only. AT commands at
other speeds are ignored.
$D n DTR Dialing
n = 0 or 1
0
$D0 Disables DTR dialing.
$D1 Dials the number in memory location 0 when DTR goes high.
$EB n Asynchronous Word Length
n = 0 or 1
0
$EB0 Enables 10-bit mode.
$EB1 Enables 11-bit mode.
$SB n Serial Port Baud Rate
n = speed in bits per second
57600
Set serial port to 300 bps.
$SB1200 Set serial port to 1200 bps.
$SB2400 Set serial port to 2400 bps.
$SB4800 Set serial port to 4800 bps.
$SB9600 Set serial port to 9600 bps.
$SB19200 Set serial port to 19200 bps.
$SB38400 Set serial port to 38400 bps.
$SB57600 Set serial port to 57600 bps.
$SB115200 Set serial port to 115200 bps.
30