Multitech MultiModem
MT5634ZBA-V-V92 User Manual page 43

MultiModemZBA-V-V92 User Guide
Command: #CBF? Callback Failed Attempts Display
Values:
Default:
Description:
Command: #CBFR Callback Failed Attempts Reset
Values:
Default:
Description:
Command:
Values:
Default:
Description:
Command: #CBN y = x Store Callback Password
Values:
Defaults:
Description:
Command: #CBP n Callback Parity
Values:
Default:
Description:
Command: #CBRy Callback Security Reset
Values:
Default:
Description:
Command: #CBS n Callback Enable/Disable
Values:
Default:
Description: #CBS0 Disables callback security.
4 AT Commands, S-Registers, & Result Codes
n/a
n/a
Requests the number of failed callback passwords since reset
or power-up. This number can be stored to nonvolatile memory
using the &W command.
n/a
n/a
Resets the number of failed callback passwords to 0. This does
not reset the number stored in nonvolatile memory.
#CBI n Local Callback Inactivity Timer
n = 1–255
20
Sets the time (in minutes) that the modem waits for a command
before forcing the user to enter the setup password again.
y = 0–29
x = password
None
Sets the callback security password for the y memory location.
The password must have 6 to 10 characters, and cannot in-
clude the + or - characters.
n = 0, 1, or 2
0
Sets parity for the callback security messages.
#CBP0 No parity.
#CBP1 Odd parity.
#CBP2 Even parity.
y = 0–29
None
Clears the password and phone number in the y memory
location.
n = 0, 1, 2, or 3
0
#CBS1 Enables local and remote callback security.
#CBS2 Enables remote callback security only.
#CBS3 Disables callback security until local hangup or reset.
38