Save/Restore - Multitech FaxFinder FF130 Administrator User Manual

Save/Restore

After you have entered the specific settings to have your FaxFinder working in your environment,
coming here to save those settings is a good idea. Were something to happen and you lost what had
been entered, you can easily reset the unit to working condition if you have a saved configuration file.
Save/Restore Configuration
Save Config
The Save Config link will save settings entered during this session to a configuration file that can
be retrieved later using the restore configuration option.
Click on the Save File button, then click OK. When saving a configuration file, try and use a place
that will help you remember where it is stored.
Restore Factory Defaults
Clicking this link will reset all data in the FaxFinder to the default values that were set at the
factory. Use this with caution. This will reboot the FaxFinder.
Restore Config
Click on the Browse button after the box to navigate to a previously saved configuration file.
Once selected, click the Restore button to have those saved values used once again.
Restore button
Once a saved configuration file has been entered in the restore config box, clicking the restore
button will use those values that were retrieved above, to set up the FaxFinder with the values
saved in that configuration file. This will reboot the FaxFinder.
Multi-Tech Systems, Inc.
Chapter 3: FaxFinder Web Management Interface
FaxFinder Admin User Guide
38