Environment Concerns - AEG 49002VMN User Manual

Hide thumbs Also See for 49002VMN:
Table of Contents

Advertisement

40

Environment concerns

The anti-tilt protection has two parts (A+B). You
can find the anti-tilt protection (B) on the right
or left side of the rear wall of the appliance (See
fig. 1). You must install the anti-tilt protection (A)
on the wall. The distance of the hole of the anti-
tilt protection (A) from the floor is about 816 mm.
Make sure you install the anti-tilt protection (A)
at the correct height. Screw it into the solid ma-
terial or use applicable reinforcement.
Check that the anti-tilt protection fits minimum
20 mm into the hole in rear wall of the appliance
(B) when you push the appliance (See fig. 2). Put
the appliance in the middle of the space between
the cupboards. If the space is larger than the
width of the appliance, you must adjust the side
measurement. Make sure that the surface behind
the appliance is smooth.
Electrical installation
WARNING!
Only a qualified and competent person must do the electrical installation.
The manufacturer is not responsible if you do not follow safety precautions from chapter
"Safety".
This appliance is supplied without a main plug and a main cable.
Applicable cable types : H07 RN-F, H05 RN-F, H05 RRF, H05 VV-F, H05 V2V2-F (T90), H05
BB-F
ENVIRONMENT CONCERNS
The symbol
treated as household waste. Instead it should be taken to the appropriate collection point
for the recycling of electrical and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local council, your household waste disposal service or the shop where
you purchased the product.
Packaging material
The packaging material is environmentally-friendly and recyclable. Plastic parts are marked
with international abbreviations such as PE, PS, etc. Dispose of the packaging material in
the containers provided for this purpose at your local waste management facility.
on the product or on its packaging indicates that this product may not be
1
50 mm
60 mm
A
2
60 mm
50 mm
A
B

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents