Oven - Clock Functions - AEG 49002VMN User Manual

Heat- up indicator
If you switch on an oven function, the bars on the display come on one by one. The bars
show that the oven temperature increases.
Residual heat indicator
When you switch off the oven, the bars on the display show the residual heat.

OVEN - CLOCK FUNCTIONS

Clock functions
7
SYMBOL
• If you set a clock function, the symbol flashes for approximately 5 seconds. In these 5
seconds, touch
• If you set the time, the symbol continues to flash for approximately 5 seconds. After
these 5 seconds, the symbol comes on. The time starts to count down.
Setting the clock functions
1. Switch on the appliance.
2. Use
related symbol, for example Minute Minder
3. Use
1 2 3 4
6 5
FUNCTION
Minute Minder
Duration
End
Time of day
or to set the time.
again and again until the display shows the necessary clock function and the
or to set the necessary time.
1 Time of day
2 Duration
3 End
4 Minute Minder
5 Setting button (Plus)
6 Setting button (Minus)
7 Selection button
To set a countdown (max. 99 minutes). This function has no
effect on the operation of the appliance.
To set how long the appliance has to be in operation.
To set the switch-off time for an oven function.
You can use Duration and End at the same time, if the ap-
pliance is to be switched on and off automatically later.
To set, change or control the time of day.
.
Oven - Clock functions
DESCRIPTION
17