Shelf Support Rails - AEG 49002VMN User Manual

34
Oven - Care and Cleaning
To support this self-cleaning process heat the oven without any food regularly:
• Turn the oven light on.
• Remove accessories from the oven.
• Select an oven function.
• Set the oven temperature to 250 °C and let oven operate for 1 hour.
• Clean the oven cavity with a soft and damp sponge.
WARNING!
Do not attempt to clean catalytic surface with oven sprays, abrasive cleaners, soap or other
cleaning agents. This will damage the catalytic surface.
Discolouration of the catalytic surface has no effect on catalytic properties.

Shelf Support Rails

Removing the shelf support rails
1. Pull the front of the shelf support rail
away from the side wall.
2. Pull the rear shelf support rail away
from the side wall and remove it.
Installing the shelf support rails
Install the shelf support rails in opposite sequence.
Important! The rounded ends of the shelf support rails must point to the front!
CAUTION!
Make sure that the longer fixing wire is in the front. The ends of the two wires must point
to the rear. Incorrect installation can cause damage to the enamel.
2
1