Environment Concerns - AEG 49190GO-MN User Manual

7. ENVIRONMENT CONCERNS

The appliance was designed and made
in accordance with the European
standards listed below:
=> EN 30-1-1, EN 30-2-1 and EN 437 plus
subsequent amendments (gas)
=> EN 60 335-1 and EN 60 335-2-6
(electrical) plus relative amendments
The appliance complies with the
prescriptions of the European Directives
as below:
=> 2006/95 EC concerning electrical
safety (BT).
=> 2004/108 EC concerning
electromagnetic compatibility (EMC)
=> 2009/142 EC concerning gas safety.
Oven accessories that could come
into contact with foodstuffs are made
with materials that comply with the
provisions of the 89/109 EC directive
dated 21/12/88.
This product complies with EU Directive
2002/96/EC.
The crossed-out dustbin symbol
reported on the appliance indicates
that the appliance must be disposed
of separately from other domestic
refuse at the end of its useful life. It
must therefore be delivered to a waste
recycling centre specifically for electric
and electronic equipment or returned to
the retailer at the moment of purchase
of a new equivalent appliance.
The user is responsible for delivering
the appliance to the appropriate
collection centre at the end of its useful
life, Failure to do so may result in a fine,
as provided for by laws governing waste
disposal.
Differential collection of waste products
for eventual recycling, treatment and
environmentally friendly disposal helps
reduce possible negative effects on
the environment and health, and also
enables the materials making up the
product to be recycled.
For more detailed information on the
available refuse collection systems,
refer to the local Municipal Solid Waste
disposal centre or the shop where the
product was purchased.
Producers and importers are
responsible for fulfilling their obligations
as regards recycling, treatment and
environmentally friendly disposal by
directly or indirectly participating in the
collection system.
ENGLISH 25