Table of Contents
Advertisement
RF Default Imaging Device
The imager supports imaging command processing (IMGSHP, IMGSNP,
IMGBOX) so that Quick*View (see
"Quick*View"
on page 11-5) and other
applications are able to perform imaging functions as if they were talking directly
to an imager. To accomplish this, the imager uses a menu command called
RF_DID (RF Default Imaging Device). RF_DID is the name of the imager
(BT_NAM) that is to receive imaging commands. The default for RF_DID is
"*"indicating that imaging commands are to be sent to all associated imagers.
Change this setting to RF_DID imager_name to ensure that they are sent to a
particular imager. Refer to
"Imager Report"
on page 11-2 to generate a report
containing the port, work group, imager name, and address for each imager.
Refer to
"Imager Name"
on page 3-8 set a unique name for each imager.
2020/4820/4820i User's Guide
8 - 9
Advertisement
Table of Contents
