Table of Contents
Advertisement
9
OCR Programming
Use this section to program the imager for optical character recognition (OCR).
The imager reads 6 to 60 point OCR typeface.
Note: OCR is not as secure as bar codes. To enhance security in OCR
applications, create an OCR template to match the data and print an OCR
check character.
The imager will read OCR-A, OCR-B, U.S. Currency Serial Number (Money),
MICR E-13B, and SEMI Font.
You can either select an OCR default, or create your own custom template for
the type of OCR format you intend to read. See "OCR" on page 9-1 for
programming codes that will enable your imager to read OCR-A, OCR-B, U.S.
Currency, MICR E 13 B, or SEMI fonts. See "OCR Templates" on page 9-3 if
you want to create a custom "template," or character string that defines the
length and content of OCR strings that will be read with your imager.
Note: Setting the template and check character options are essential for OCR
reading.
OCR Fonts
Default All OCR Settings turns off all OCR capability in the imager, so the
imager will be able to scan linear, stacked, matrix, and composite bar codes, but
not OCR fonts. In addition, any OCR templates you have created are erased.
The eight digit default templates are reinstated for any future use of the OCR On
codes listed below.
OCR
Note: OCR symbols can misread when scanned sideways or upside down. Use
Working
presented upright to the imager.
Only one OCR symbology can be read at a time.
2020/4820/4820i User's Guide
< Default All OCR Settings >
Orientation, page 4-19, if your OCR symbols will not usually be
9 - 1
Advertisement
Table of Contents
