Table of Contents
Advertisement
Codabar
<Default All Codabar Settings>
Codabar
* On
Off
Codabar Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the bar code. You
may either transmit, or not transmit Start/Stop characters.
Default = Don't Transmit .
Transmit
* Don't Transmit
Codabar Check Character
Codabar check characters are created using different "modulos." You can
program the imager to read only Codabar bar codes with Modulo 16 check
characters. Default = No Check Character.
No Check Character indicates that the imager reads and transmits bar code
data with or without a check character.
When Check Character is set to Validate and Transmit , the imager will only read
Codabar bar codes printed with a check character, and will transmit this
character at the end of the scanned data.
2020/4820/4820i User's Guide
7 - 3
Advertisement
Table of Contents
