Clearing And Resetting Data - Strong SRT 5405 User Manual

4. Press or until the upgrade file you transferred to the USB memory stick is highlighted
CH CH
and then press OK.
The upgrade process may take a few minutes. When it is completed, a message appears at the
bottom of the USB File List advising that you must now reset the
5. Press EXIT and then follow the procedure in the next section to reset the

Clearing and resetting data

You can reset the
factory. This clears all channels, stations, preferences and other user settings. You will need to
rescan for channels and stations before you can continue watching digital TV or listening to digital
radio.
WARNING: This procedure returns the
(such as time zone, channels, stations and timers) will be lost.
1. Press MENU on the remote control. The Main Menu screen appears.
2. If System Setting is not highlighted on the menu, press
The System Setting menu appears.
3. If Factory Default is not highlighted on the menu, press
4. A warning message appears asking if you are sure you want to clear all services and restore
factory settings. To continue, press OK. To cancel, press MENU or EXIT and ignore the rest of this
procedure.
5. Another message appears asking if you want the
channels and stations. To accept the automatic search press OK; otherwise, press MENU or EXIT.
NOTE: If you proceed with resetting the factory defaults and get a blank screen, press EXIT,
and then press FORMAT until something appears on your screen.
6. if you didn't accept an automatic search, the No Service! message appears on the screen.
You will now have to search for channels an stations yourself. See "Rescanning for channels
and stations" on page 25 for instructions. If you accepted an automatic search, the Auto
window appears and the search commences.
, by restoring the unit to the default settings it had when it left the
to its default factory settings. All data
36
.
or until it is and then press OK.
CH CH
or until it is and then press OK.
CH CH
to automatically search for
.