Table 19-10 Information For Removing Packages/Patches - Sun Microsystems Netra User Manual

To Remove Packages, or Patches
Note – Sometimes packages may not be removed in the correct order. If this
happens, re-select the packages that failed, and remove them.
1. Select System Administration: Software Management.
The Software Management Administration page is displayed.
2. Select Remove: Packages or Remove: Patches.
3. Enter the information in the form using Table 19-10.

Table 19-10 Information for Removing Packages/Patches

Remove All Patches Removes all patches on the Netra server.
Remove Selected Removes only the packages or patches you specify from the
Packages/Patches list. If you select this option, you must also select at least one
package/patch; if you select any packages/patches, you
must also select this option.
•You cannot remove all installed packages.
4. Restart the Netra server using System Administration: Restart and
Shutdown.
To View Installed Packages, or Patches
•
To view installed packages, select System Administration: Software
Management View: Installed Packages.
•
To view installed patches, select System Administration: Software
Management View: Installed Patches.
Netra System Administration
19
19-15