Install/Remove Procedures; Table 19-9 Information For Installing Packages/Patches - Sun Microsystems Netra User Manual

19

Install/Remove Procedures

19-14
•
Remove packages, or patches: Use this option to remove packages, or
patches that are installed on the Netra server. Once these clusters, packages,
or patches are removed, you should restart the Netra server.
•
View packages, or patches: Use this option to see what packages, or patches
(if any) are installed on the Netra server.
To Specify the Installation Medium
1. Select System Administration: Software Management
installation medium.
The Select Installation Medium page is displayed.
2. Select the medium from which you will install packages or patches.
If you select CD-ROM or Diskette, the medium is automatically mounted
onto the system as part of the installation. If you select Mounted Directory,
enter the path to the directory from which the software will be installed.
To Install Clusters, Packages, or Patches
1. Select System Administration: Software Management.
The Software Management Administration page is displayed.
2. Select Install: Clusters, Install: Packages, or Install: Patches.
3. Enter the information in the form using Table 19-9.

Table 19-9 Information for Installing Packages/Patches

Install All Installs all clusters, packages, or patches from the selected
Clusters/Packages installation medium.
/Patches
Install Selected Installs only the clusters, packages, or patches you select from
Clusters/Packages the list. If you select this option, you must also select at least
/Patches one cluster/package/patch; if you select any
clusters/packages/patches, you must also select this option.
4. Restart the Netra server using System Administration: Restart and
Shutdown.
Netra Internet Server 3.1 User's Manual—September 1996
Select new