Firmware/Fpga Versions; D20 Chassis - GE D20MX User Manual

CHAPTER 1: BEFORE YOU START

Firmware/FPGA versions

D20 chassis

D20 non-VME
D20MX HARDWARE USER'S MANUAL
The Version Image column indicates the image versions in the SAN0001 and SAN0002
files.
Table 4: D20MX embedded images
Image Image Name
ID
S032 D20S Peripheral Board (supports B003) D20S Peripheral Board Code
S033 D20A Peripheral Board (supports B003) D20A Peripheral Board Code
S034 D20K Peripheral Board (supports B003) D20K Peripheral Board Code
S035 D20C Peripheral Board (supports B003) D20C Peripheral Board Code
S055-0 D20AC Peripheral Board (supports B003) D20AC Peripheral Board Code 108
Table 5 lists the firmware, FPGA and other version information.
Table 5: Firmware/FPGA versions information
Component Version ID Type ID
JMON 1.0.630- N/A
2238
Board N/A Board
Local Bus 3.02 N/A
FPGA
NVRAM FPGA 15 File
VxWorks O/S v1.20 Build
and BSP
Application v1.20 Build
Bootrom v1.1/0 Build
For a detailed description of the D20 chassis options and components, refer to
Familiarization chapter in the D20/D200 Installation and Operation Guide, 994-0078. The
D20MX supports the two versions of the D20 chassis listed in Table 6.
Table 6: Types of D20 chassis
Type GE part number
D20 non-VME 500-0305
1 slot horizontal
D20 VME 500-0280
5 slot horizontal
The D20 non-VME single-slot chassis consists of the following:
• D20MX processor board
• Modem slots
• Power supply with switch and fuses; see Figure 1.
GE INFORMATION
Description
Date
N/A Wed Dec 12,
2012 11:06AM
D20MX N/A
N/A N/A
N/A N/A
33d61705e0e7a6e7 Jul 17 2013,
21:00:12
d9dc1bd692eedad4 Jul 17 2013 -
20:28:26
55959fd4c8a2db7f Mar 11 2013
15:50:15
Description
Chassis with backplane, external power connections, and
seven serial I/O ports
Chassis with five-card VME backplane
Version Changed
Image
303
301
306
307
How to Find
"D20 Version" shown
during cold boot
sequence.
"Board ID" shown via
SHELL command: si
"FPGA version" shown via
SHELL command: si
"NVRAM Rev" shown via
SHELL command: si
SHELL command: ver
SHELL command: ver
SHELL command: ver
19