Table of Contents
Advertisement
110
3.4.
Select the D20MX device created in step 1 [copied and renamed D20 device],
which is to use the intended SAN firmware in the firmware library.
3.4.1. Right-click on the D20MX device.
3.4.2. Select the Processor tab > Firmware tab > Use Firmware Type check-
box to choose the SAN0001 firmware.
Result: The Select a Firmware Type window appears. Click OK.
3.4.3. Confirm the SAN0001/SAN0002 firmware is now associated to the
D20MX device (from step 1).
3.5.
Manually set the D20MX processor card.
Note: In the same device properties, the General tab does not include a D20MX
processor card.
GE INFORMATION
APPENDIX D: USING CONFIGPRO WITH D20MX
D20MX HARDWARE USER'S MANUAL
Advertisement
Table of Contents
