Table of Contents
Advertisement
112
3.6.2. The Services settings highlighted below are required for remote
connection into the RTU. Although the defaults for WesmaintSSH and
CommandSSH are 22 and 922 respectively, these ports can be changed
to customized numbers:
– WesmaintSSH allows remote access to the wesmaint menu.
– CommandSSH allows remote access to the command prompt > D20M
prompt.
These are both TCP connections.
4.
Click OK when the D20MX device properties are set.
Result: The applications present in the SAN firmware are applied to this new D20MX
device.
5.
Carefully configure the applications of interest before generating the tables for the
D20MX device. Disable unused applications.
5.1.
In the D20MX device from step 1, disable the unused applications identified in
step 2.
5.2.
Configure the Wesmaint II+ [B014-1N V620] and System Point Database [B008-
1 V3.11] applications.
APPENDIX D: USING CONFIGPRO WITH D20MX
GE INFORMATION
D20MX HARDWARE USER'S MANUAL
Advertisement
Table of Contents
