GE D20MX User Manual page 80

80
21. Navigate to the DVD/CD drive > DEFNS > APPLDEF.
Result: The contents of the APPLDEF folder is displayed with the file DAL100.DB
selected.
22. Click Select.
Result: Messages are displayed about the application definitions being extracted to
the configuration computer, and finally the Data Collection Applications of the
FAC_DEF device appear.
23. Close the device configuration by clicking on the door icon.
Result: The Main Page of the D20MX factory default project appears with the FAC_DEF
device appearing on the page.
24. Click from the menu bar, Device > Firmware.
Result: The Firmware Library dialog appears.
25. Depending on which factory default project you chose in the second step, select either
SAN0001/002 or SAN0002/002.
26. Click Copy.
Result: The Firmware Information dialog appears.
27. In the "Copy To" area select the Project Directory and Project Name of the project you
want to transfer to the D20MX.
Result: The "Copy To" area contains the Project Directory and Project Name of the
project you want to transfer to the D20MX.
28. Click OK, Close and the door icon
Result: The main window of ConfigPro appears with the tree view of the project
directory on the left.
29. Make a backup copy of your project.
29.1. Select from the menu bar, Project > Copy Project.
Result: The Copy Project dialog appears.
29.2. In the "From" area, navigate to the folder and select the project you want to
transfer to the D20MX.
29.3. In the "To" area, enter a new unique name for the project.
29.4. Click OK.
Result: The main window of ConfigPro appears with the tree view of the project
directory on the left.
30. On the tree view displayed to the left, navigate to the copied project and double-click
on the project name.
Result: The main window of the copied project appears.
31. Right-click on the D20 device you want to transfer and select Properties.
Result: The D20 Device Properties window appears.
32. Click the Processor tab and the Firmware tab. Then click Select.
Result: The Select a Firmware Type dialog appears. Depending on which factory
default project you chose in the second step, either SAN0001 or SAN0002 will appear.
33. Select whichever of SAN0001 or SAN0002 appears and click OK and OK.
Result: A confirmation dialog appears asking if you want to make a backup copy now.
34. Click No because you have already made a backup.
Result: Messages will appear indicating the upgrade is in progress. Messages appear
in the Device Log indicating the results of the upgrade. The D20 device appears with a
red dot.
35. Review all warnings and make corrections as needed, reviewing the original copy to
retrieve values that may have been replaced with default values during the upgrade
CHAPTER 5: CONFIGURING THE SOFTWARE
GE INFORMATION D20MX HARDWARE USER'S MANUAL