DigiDesign 3 Getting Started Manual page 50

tions when the encoder is moved, or volume in-
formation when the fader is moved. The top row
of the LCD shows the pan mode (left or right)
and Main Counter.
Send Switch When enabled (lit), 003 is in Send
View. In this view, rotary encoders adjust Send
level and the faders adjust track volume. The
bottom row of the LCD shows the names of cur-
rently assigned sends across all channel strips
for a given send position (Sends A–J in
Pro Tools). The top row of the LCD shows the
send position and Main Counter.
Insert Switch When enabled (lit), 003 is in Insert
View. In this view, the bottom row of the LCD
shows the names of currently assigned inserts
(hardware inserts or plug-ins) across all channel
strips for a given insert position (Inserts A–E in
Pro Tools). The top row of the LCD shows the
insert position and Main Counter.
Channel View Section Switches
The first four Channel View switches determine
the type of information displayed for a selected
track. The first two switches focus on particular
types of plug-ins (EQ and Dynamics), while the
second two address all types of inserts and
sends.
For information on using Console View for
specific Pro Tools workflows, see
Chapter 11, "Pro Tools Mode with 003."
42 003 & 003 Rack Getting Started Guide
The Channel View section also includes Page
Left, Page Right, Master Bypass, and ESC
switches.
EQ Insert
Dynamics
Pan/Send/PRE
Channel View switches
003 is in Channel View when any of the first
four Channel View Select switches (EQ, Dynam-
ics, Insert, or Pan/Send) is lit in the Channel
View section.
Think of Channel View as a way to temporarily
focus on all the plug-ins, inserts or sends on a
single channel.
EQ Switch When enabled (flashing), 003 is in
Channel View. In this view, 003 identifies chan-
nels with equalizer plug-ins assigned to them by
illuminating their Channel View switches. The
top row of the LCD shows "Select EQ" and the
Main Counter. The bottom row shows track
names.
Dynamics Switch When enabled (flashing), 003
is in Channel View. In this view, 003 identifies
channels with dynamics plug-ins (such as com-
pressors or limiters) assigned to them by illumi-
nating their Channel Select switches. The top
row of the LCD shows "Select Dynamics" and
the Main Counter. The bottom row shows track
names.
Master ESC
< Page >
Bypass