DigiDesign 3 Getting Started Manual page 107

In addition, the Mute switch controls Send
mute, whereas the Solo switch continues to con-
trol the track's output muting and the Select
switch continues to control Send Pre/Post sta-
tus.
For mono tracks with stereo sends, only the left
pan indicator shows a pan position; the right
pan indicator is inactive.
For stereo tracks with stereo sends, you can con-
trol either the left or right send pan from the ro-
tary encoder.
To assign a stereo send channel to a rotary
encoder:
While in Send Flip mode, press the Meter
switch immediately to the right of the rotary en-
coders and select Left or Right.
Both the LCD and the Meter Mode LEDs indi-
cate whether the left or right pan position is dis-
played. The rotary encoder LEDs show pan posi-
tioning.
Plug-In Flip Mode When you are in Channel
View (or Console Insert View) and working with
a plug-in insert, the Flip switch moves any
plug-in control assignments from the rotary en-
coders to the faders, allowing you to use the
touch-sensitive faders to edit and automate
plug-in control values. The types of plug-in con-
trols depend on the particular plug-in you are
using.
See "Working in Channel View" on
page 87 for more details on working with
pan controls and sends in Channel View.
Pan/Send Flip Mode When you are in Channel
View and working with the pan and send assign-
ments on a channel, the Flip switch moves the
send level controls to channel faders 3–7, and
the send pan controls to rotary encoders 3–7.
(The first Channel's LCD display and rotary en-
coder continue to show track pan position for
that track.)
In this mode, the Channel Select switches toggle
pre- and post-fader metering for the correspond-
ing send.
For stereo tracks with stereo sends, you can con-
trol either the left or right send pan from the ro-
tary encoder. See "Send Flip Mode" on page 98.
Banking Channels on 003
To move the display of tracks on 003 forward or
backward eight channels at a time:
Press the Bank switch.
1
Press the Left or Right Arrow key.
2
To move the display of tracks on 003 forward or
backward one channel at a time:
Press the Nudge switch.
1
Press the Left or Right Arrow key.
2
To scroll the display of tracks on 003 forwards
Hold the Nudge switch and rotate the inner
Jog wheel clockwise to scroll tracks to subse-
quent faders.
To scroll the display of tracks on 003 backwards:
Hold the Nudge switch and rotate the inner
Jog wheel counter-clockwise to scroll tracks to
previous faders.
Chapter 11: Pro Tools Mode with 003 99