DigiDesign 3 Getting Started Manual page 12

• Aux Input pair (+4 dBu) for direct monitoring
of tape or CD input sources.
• Two 1/4-inch stereo headphone outputs
(Headphone 1 and 2) with level controls.
Headphone 2 can monitor Main Outputs 1–2
like Headphone 1, or be switched to monitor
Outputs 3–4 for a discrete cue mix.
• Optical connectors for 8 channels of Optical
(ADAT) I/O (supporting up to 48 kHz) or 2
channels of Optical S/PDIF I/O.
• RCA connectors for 2 channels of S/PDIF dig-
ital I/O supporting up to 24-bit, 96 kHz audio.
• Word Clock In and Out ports, to receive or
send 1x Word clock.
• 1 MIDI In port and 2 MIDI Out ports, provid-
ing up to 16 channels of MIDI input and up to
32 channels of MIDI output.
• Footswitch jack for punching in and out while
recording.
• Monitor section with Mute switch and
switches for routing input and output signals.
4 003 & 003 Rack Getting Started Guide
Control Surface Features
(003 Only)
003 provides an integrated control surface that
includes the following:
• Eight motorized touch-sensitive faders for
controlling track volume and other parame-
ters. Includes ability to disable faders during
playback of automated mixes.
• Dedicated Solo, Mute and Channel Se-
lect/Record Arm switches.
• Eight multifunction rotary encoders for oper-
ating pan, send, and plug-in controls.
• Fast and convenient access to sends, inserts,
plug-in pages, pan settings, and other track
functions.
• Automation Mode switches for selecting and
displaying Automation modes.
• Large, bright LCD for data display.
• Transport controls, plus Transport mode
switches for loop playback, loop record, and
QuickPunch.
• Dual-concentric Jog/Shuttle wheel.
• Save, Undo, and Enter switches. Memory Lo-
cation switch for recalling Memory Locations
or opening the Memory Location window.
• Windows switches for Pro Tools display of
plug-in, Mix, and Edit windows.
• Navigation and Zoom controls.
• MIDI mode switches for MIDI mapping.
• Utility mode switch for testing 003.