Da-Lite Tensioned Large Cosmopolitan Electrol Instruction Book page 4

Hide thumbs Also See for Tensioned Large Cosmopolitan Electrol:

TENSIONEd LARGE COSMOPOLITAN

VOLTAGE CONTROL

Internal wiring has been completed at the factory. Installer must route power to the wall switch and to the junction box

located on the left end of the screen case.

see wiring diagram below for wire connections.

NOTE: This screen can only be controlled by a single 120VAC or 240VAC wall switch. To use multiple switches, an optional low

voltage control must be used.

120V WIRING DIAGRAM FOR

STANDARD WALL SWITCH

JUnCTIOn bOX

LOCaTEd In

LEfT EndCaP

nOTE: a sIngLE sWITCh CannOT bE

UsEd TO OPERaTE mORE Than

OnE sCREEn. COnTaCT ThE

faCTORY fOR fURThER

InfORmaTIOn.

sPdT sWITCh WITh

CEnTER Off

Off

dOWn

ThIs sWITCh Can nOT

bE UsEd WITh LvC.

da-Lite offers two styles of 240 volt wall switches for standard operation.

ELECTROL

aC (COmmOn)

bLaCk

aC hOT 120vaC 60hZ 1 amP

bLaCk/YELLOW

REd

240 VOLT WIRING DIAGRAM FOR STANDARD WALL SWITCH:

Please see wiring diagram in wall switch boxes included with screen.

INSTALLATION FOR SCREENS WITHOUT A BUILT-IN LOW

WhITE

REd

bLaCk

gREEn

mOTOR