Automatic two-sided copying from the document glass
When the optional duplex module is installed, the following automatic two-sided copying can be performed. The
paper is automatically turned over during copying, allowing two-sided copies to be made with ease.
Original
1
Place the original on the document glass.
(pages 4-3 to 4-6)
Original scale
mark
5½ x 8½
or A5
8½x14
or B4
8½x11 or A4
11x17 or A3
GAlign the corner of the original with the tip of the
arrow mark
on the document glass scale.
GPlace the original in the appropriate position for its
size as shown above.
2
Touch the [2-SIDED COPY] key.
SPECIAL MODES
2-SIDED COPY
OUTPUT
Copy
Original scale
mark
8½x11R or A4R
3
Touch the [1-sided to 2-sided copy] key.
Example of a
portrait-oriented
original
When making automatic two-sided copies of a
one-sided 11" x 17" (A3) or 8-1/2" x 14" (B4) size
portrait original, or when you wish to invert the top
and bottom of the back side of a two-sided original,
touch the [BINDING CHANGE] key.
4
Touch the [OK] key.
0
OK
BINDING
Perform steps 3 to 8 on pages 4-11 and 4-12.
NORMAL COPYING
Example of a
landscape-oriented
original
4-13
4