Tx/Rx Setting - Oce im7520 User Manual

Utility Mode

10.18 TX/RX Setting

These are the options on the defaults of transmission and reception modes.
Item
Duplex Print
(RX)
Inch Paper Pri-
ority Over A4
Print Paper Se-
lection
Print Paper
Size
Tray Selection
for RX Print
Min. Reduction
for RX Print
Print Separate
Fax Pages
No. of Sets (RX)
* indicates factory default setting.
*1
: The displays are different depending on the country.
*2
: To make the setting of [Print Paper Size] enable, set [Tray Selection for
RX Print] to [Auto].
*3
: Tray type may be different depending on the installed option.
*4
: When [Min. Reduction for RX Print] is set to [x1.0], [Print Paper
Selection] and [Tray Selection for RX Print] are set to [Auto]. [Print
Separate Fax Pages] is turned to [OFF].
Network Fax
Description
When set to ON, the original received is
printed on both sides of the paper.
Not indicated when [Print Separate Fax
Pages] is ON.
By setting this function ON, inch series
*1
form of paper is preferentially selected for
the received original.
When the priority of each size is set:
A record is made in the priority size. When
no priority size is set, a record is made in
the nearest size.
When the fixing of each size is set:
A record is made only in the size set.
Set the paper size on which the document
*1 *2
received is printed.
The default varies according to the setting
of [Inch Paper Priority Over A4].
Determines the paper tray if you want to fix
*3
the paper tray for received document.
Set the output magnification of the original
*4
received.
Determines the default of transmission
mode.
Not indicated if Duplex Print (RX) is ON.
Set the number of prints for the received
document.
10
Available value
*
OFF / ON
*
OFF / ON
*
Auto Select / Fixed
Size / Priority Size
* 1
A3 / B4 / A4 / 8 / × 11
2
1
/ 8 / × 14 / 11 × 17
2
*
Auto / Tray 1 / Tray 2 /
Tray 3 / Tray 4
*
87-96 / × 1.0
*
OFF / ON
*
1 -10
10-51