Oce im7520 User Manual page 168

9
3
Select the Program you want to register and then press [Edit].
4
Set the functions.
– Name:
Enter the registration name.
– Destination:
Select an address from [Select from Address Book] or enter it
directly through [Direct Input].
– When Address Book is specified for an address, the details of the
setting for Program take precedence over those for Address Book.
– Scan Setting:
When setting the Scan Setting, press [Yes] and then set each
function.
– Comm. Setting:
When setting the Comm. Setting, press [Yes] and then set each
function. In the case of the network fax, this is not used.
5
Press [OK].
Registration is performed and the registered destination is displayed
on a list.
6
Press [Close].
– When proceeding with the registration of the Program, go to Step 3.
9-14
Registering/Settings
Network Fax