Setting The Dial Mode; Caller Id Features; Summary Screen; Receiving And Storing Calls - RCA 1223 User Manual

3. Press the Review  button to enter digit .
NOTE: The local area code may also be entered directly by using the num-
ber pad.
4. Press the Menu button to save.

Setting the Dial Mode

This adjustment allows you to select tone (touch-tone) or pulse (rotary) dialing.
1. Press the Menu button until TONE/PULSE shows in the display.
2. Press the Review  or  buttons to show the current dialing mode. The
default is TONE dialing.
3. To change the dialing mode, press the review key. The display alternates
between the two modes.
4. Press the Menu button to save.
NOTE: The phone will exit set up after 20 seconds if no buttons are pressed.
REMINDER: The time and date are programmed automatically when the
first Caller ID record is successfully received after set up.

Caller ID Features

IMPORTANT: In order to use all of the features of this telephone, you
must subscribe to two separate services available from your local
telephone company: the standard Name/Number Caller ID Service to
know who is calling when the phone rings and Caller ID with Call Waiting
Service to know who is calling while you are on the phone.

Summary Screen

The Summary Screen shows the current time, date, and number of new calls
to review. It is displayed until any button is pressed.
NOTE: The number of new calls is displayed until all new calls have been
reviewed.

Receiving and Storing Calls

This unit receives and displays information transmitted by your local phone
company. This information can include the phone number, date, and time; or
the name, phone number, date, and time. The unit can store up to 75 calls for
later review. When the memory is full, a new call automatically replaces the
oldest call in memory. NEW appears in the display for calls received that have
not been reviewed.
14