Installation & Setup; Installing The Batteries; Installation; Desktop Installation - RCA 1223 User Manual

Installation & Setup
CAUTION: Disconnect the phone cord from the wall outlet before
installing or replacing the batteries.

Installing the Batteries

Your Caller ID phone uses 4 AA-size alkaline batteries for receiving and storing
Caller ID records and for storing the numbers you use for memory dialing,
pulse dialing, redial, and predial functionality.
1. Release latch on battery compartment and remove cover.
2. Insert 4 AA-size alkaline batteries as
shown on the diagram in the battery
compartment.
3. Snap the battery compartment door
back into place and replace the mounting
bracket .
4. If the line cord was previously connected,
re-attach it to the unit and check your
memory locations.
NOTE: If the low battery icon appears in the display, you need to replace
the batteries. It is important that you replace the batteries as soon as pos-
sible in order to maintain Caller ID operation.
IMPORTANT: If you are not going to use the telephone for more than
30 days, remove the batteries because they may leak and damage
the unit .

Installation

Desktop Installation

To attach the desktop pedestal:
9