Chapter 5 Geminirfid Demo Application; Introduction; Host Computer Display Setup - Motorola MC9090-G Manual

Chapter 5 GeminiRFID Demo Application

Introduction

Application developers can use the
how the application works and to assist in application development.
Integrators can use the MC909X Integrator Guide
product integration. Use the utilities to change and/or set the device parameters and to test applications.
NOTE The screens and windows are provided for illustration purposes only and may differ from actual screens. The
applications described may not be available on (or applicable to) all devices.
Procedures are not device specific and are intended to provide a functional overview.
The GeminiRFID Demo application is provided for the purpose of demonstration and are not designed for
production environments.
The reader has the capability to program, erase and write; Gen2 tags. The current GeminiRFID Demo
application only provides an example for programming tags.
The GeminiRFID Demo is not provided with source code. However, a sample, is provided in the SMDK for C.

Host Computer Display Setup

To view the system menus on a local PC use an application such as Microsoft's Remote Display Control for Pocket
PC. For more information and the Remote Display Control for Pocket PC download go to
http://www.microsoft.com/downloads/
application and follow the provided installation and setup procedures.
After the remote display application has been installed on the host computer, set up an ActiveSync connection
between the host computer and the MC9090-G RFID reader (see the MC909X Integrator Guide
).
72E-72216-xx
Start the remote display application to access the MC9090-G RFID reader application.
Launching the GeminiRFID Demo Application on page 5-3
, P/N: 72E-72216-xx
and search for Remote Display Control for Pocket PC. Download the
for an overview of
for product settings and as an aid in the
, P/N: