Chapter 7 Maintenance & Troubleshooting
Introduction
This chapter includes instructions on cleaning and storing the RFID reader, and provides troubleshooting solutions
for potential problems during RFID reader operating.
Maintaining the RFID reader
For trouble-free service, observe the following tips when using the RFID reader:
•
Take care not to scratch the screen of the RFID reader. When working with the RFID reader, use the supplied
stylus or plastic-tipped pens intended for use with a touch-sensitive screen. Never use a pen or pencil or
other sharp object on the surface of the RFID reader screen.
•
Although the RFID reader is water and dust resistant, it is good practice not to expose it to rain or moisture
for an extended period of time.
•
The battery must be changed in a clean dry area.
•
Protect the RFID reader from temperature extremes. Keep it away from heat sources.
•
Do not store or use the RFID reader in any location that is extremely dusty, damp or wet.
•
Use a soft cloth to clean the RFID reader. If the surface of the RFID reader becomes soiled, clean it with a
soft cloth moistened with a diluted window-cleaning solution.
NOTE This MC9090-G RFID Integrator Guide Supplement is configured to provides only the unique set up and
configuration procedures for the MC9090-G RFID mobile computers and accessories. The accessory
troubleshooting is provided in the MC909X Integrator Guide, P/N: 72E-72216-xx.