Chapter 1 Getting Started
Introduction
This chapter lists the accessories for the MC9090-G RFID mobile computer and explains how to install and charge
the batteries, replace the strap and start the mobile computer for the first time.
NOTE This MC9090-G RFID Integrator Guide Supplement is intended as a supplement to the MC909X
Integrator Guide, P/N: 72E-72216-xx. Procedures common to the MC909X series of products are
referenced to the MC909X Integrator Guide.
MC909X Integrator Guide
The MC909X Integrator Guide
MC9090-G RFID mobile computer:
•
Accessories; describes the accessories available for the mobile computers and how to set up power
connections and battery charging capabilities, where applicable.
•
ActiveSync; provides instructions on installing ActiveSync and setting up a partnership between the mobile
computer and a host computer.
•
Wireless Applications; provides instructions using and configuring the mobile computer on a wireless
network.
•
Wireless Applications; describes how to configure the WLAN wireless connection.
•
Rapid Deployment Client; explains how to use the Rapid Deployment Client to facilitate software
downloads to the mobile computer from a Mobility Services Platform (MSP) Console FTP server.
•
AirBEAM Client; explains how to set up the mobile computer to synchronize with a server using the
AirBEAM® Client and AirBEAM Staging applications.
•
Application Deployment for Windows Mobile; provides instructions for installing the SMDK for C and
SMDK for .NET on the host computer.and downloading software and files to the mobile computer.
•
Maintenance & Troubleshooting; includes instructions on cleaning and storing the mobile computer, and
provides troubleshooting solutions for potential problems during mobile computer operation.
provides the following support information applicable to the
, P/N: 72E-72216-xx