Rfiddemo Application; Using Rfiddemo To Read Tags From A Remote Reader - Motorola MC9090-G Manual

4 - 2 MC9090-G RFID Integrator Guide Supplement

RFIDDemo Application

The RFIDDemo application is provided as a demo application to be used by developers in developing customized
production applications. The application is viewed on a host computer using a remote viewing application (not
provided). The RFIDDemo application is provided for the purpose of demonstration and is intended to be used
as-is.
Gen2 tags can be read, programmed, erased, written locked and killed. Each tag contains the EPC number (64 or
96 bits), CRC and kill code. In addition, data can be collected by decoding in-range EPC Gen2 RFID tags.
NOTE The reader is optimized to read only Gen 2 tags and the default setting on the RFIDDemo application are
set to read and write only Gen2 tags.
The reader has the capability to read, program, erase, write lock and kill; Gen2 tags. The current
RFIDDemo application only provides an example for programming tags.
When the read command is initiated, the reader interrogates all of the RFID tags within the radio frequency (RF)
field of view. The reader captures data from each new tag found and adds it to the list box in the main Tags window.
When the read command is stopped, the reader stops interrogating tags.
Perform the following procedures to setup and use the RFIDDemo application:
•
Setup the local host computer display.
Setup a host computer to view the MC9090-G RFID menus.
•
Setup the LAN host.
The LAN host computer must be setup to receive the tag data.
•
Setup the wireless connection.
See the MC909X Integrator Guide
connection.
•
Launch the RFIDDemo application.

Using RFIDDemo to Read Tags From a Remote Reader

The RFIDDemo can reside on many CE4.2/CE5.0 and Mobile based devices including Motorola's RD5000,
MC90xx readers, WIN CE based VRCs, and XR Series products.
On devices that have integrated RFID reading, the RFIDDemo automatically finds and connects to the integrated
RFID reader. These readers include RD5000, MC90xx, and XR Series.
On devices that do not have an integrated RFID reading capability, the RFIDDemo must be configured to connect
to the remote RFID reader using the reader IP address and port number 3000.
The settings screen is described in
, P/N: 72E-72216-xx
Device Settings on page 4-5.
for information on setting up the wireless