Feature Descriptions - IMC Networks iMcV-DS3 Operation Manual

DIP Switch Settings
FUNCTION
2
Loopback (iView
Loopback Type (iView
Jitter Attenuation (iView
2
FiberAlert (iView
Line Build-Out (iView
Transmit Data Source (iView
DS3/E3/STS-1 Selection
Remote Management

Feature Descriptions

The iMcV-DS3/E3/STS-1 module includes several features that allow it to be
configured for varying DS3/E3/STS-1-based environments.
Loopback
This switch enables or disables the loopback feature. When this feature is
enabled, the data line (Coax or Fiber) set by the Loopback Type DIP switch is
looped back.
By default this feature is set to DISABLED.
This feature can be controlled by SNMP management software (iView
iMcV-DS3/E3/STS-1 module is installed in a managed chassis.
SWITCH SETTINGS
Configurable)
S1-1: OFF
S1-1: ON
2
Configurable)
S1-2: OFF
S1-2: ON
2
Configurable)
S1-3: OFF
S1-3: ON
Configurable)
S1-4: OFF
S1-4: ON
2
Configurable)
S1-5: OFF
S1-5: ON
2
Configurable)
S1-6: ON 7: ON
S1-6: OFF 7: ON
S1-6: ON 7: OFF
S1-6: OFF 7: OFF
S1-8: ON 9: OFF
S1-8: OFF 9: ON
S1-8: ON 9: ON
S1-10: OFF
S1-10: ON
RESULT [(D) = Default]
Loopback Disabled (D)
Loopback Enabled
Coax (D)
Fiber
Jitter Attenuator on Receive Side
Jitter Attenuator on Transmit Side (D)
FiberAlert Disabled (D)
FiberAlert Enabled
0 to 255 ft.
> 255 ft. (D)
Standard Data (D)
Unframed All Ones
Alternating Ones & Zeros
Pseudorandom Bit Sequence
45 Mbps (DS3)
34 Mbps (E3)
52 Mbps (STS-1)
Remote Management Disabled (D)
Remote Management Enabled
3
2
) when the