Step 2: Connect The Audigy 2 Drive Cables - Creative Sound Blaster Audigy2 Platinum User Manual

Step 2: Connect the
Audigy 2 Drive
cables
Use the AD_EXT cable with
the Audigy 2 Drive ONLY. Do
not attempt to use a
conventional IDE cable or any
other cable with the Audigy 2
Drive as that may cause
electrical shorts and permanent
damage to the Audigy 2 card
and Audigy 2 Drive, which will
void the warranty for this
product. Your computer may
potentially be damaged too.
Connect the cables to the Audigy 2 Drive as shown in Figure 1-9.
A
Figure 1-9:
B
Audigy 2 Drive
Connecting the Audigy 2 Drive cables.
C
E
A: Internal SB1394/
FireWire cable
B: Jumper for microphone
type selection
C: Power splitter cable
D: To system power supply
F
unit
E: Red-Coloured wire
F: AD_EXT cable
G: Black circle on the
underside of the cable
G
Installing Hardware 1-15
D