Step 4: Connect Cables To Sound Blaster Audigy 2 Card - Creative Sound Blaster Audigy 2 User Manual

Step 4: Connect
cables to Sound
Blaster Audigy 2
card
• If the Sound Blaster
Audigy 2 card is
connected to both the
CD_SPDIF and CD Audio
connectors on a CD-ROM
or DVD-ROM drive, do
not enable the CD Audio
and CD Digital options at
the same time in Creative
Surround Mixer.
• Analog and Digital CD
audio cables are not
needed when CDDA is
used.
• The CD_SPDIF connector
is not used with software
DVD players.
For analog CD audio output:
connect an Analog CD audio cable (available separately) from the Analog Audio
connector on your CD-ROM/DVD-ROM drive to the CD_IN connector on the Sound
Blaster Audigy 2 card as shown in Figure 1-6.
Figure 1-6: Connecting analog/digital audio cables to CD-ROM/DVD-ROM drives.
For digital CD audio output:
connect the Digital CD audio cable (included with some models) from the Digital
Audio connector on your CD-ROM/DVD-ROM drive to the CD_SPDIF connector on
the Sound Blaster Audigy 2 card as shown in Figure 1-6.
A
OR
B
C
A: CD-ROM/DVD-ROM
drive
B: Analog CD Audio
cable (available
separately)
C: Digital CD Audio
cable (included
with some models)
Installing Hardware 1-9