Creative Sound Blaster Audigy2 Platinum User Manual page 71

❑ Make sure the Analog Audio connector on the CD-ROM drive and the CD In connector on the audio
card are connected.
❑ Enable digital CD playback:
For Windows 98 SE
i. Click Start -> Settings -> Control Panel.
ii. In the Control Panel dialog box, double-click the Multimedia icon.
iii. In the Multimedia Properties dialog box, click the CD Music tab.
iv. Click the Enable digital CD audio for this CD-ROM device check box to select it.
v. Click the OK button.
For Windows Me
i. Click Start -> Settings -> Control Panel.
ii. In the Control Panel dialog box, double-click the System icon.
iii. In the System Properties dialog box, click the Device Manager tab.
iv. Double-click the DVD/CD-ROM drives icon.
Your computer drives will appear.
v. Right-click the disk drive icon. A menu will appear.
vi. Click Properties.
vii. In the Digital CD Playback box of the next dialog box, click the Enable digital CD audio for this
CD-ROM device check box to select it.
viii.Click the OK button.
For Windows 2000 and Windows XP
i. Click Start -> Settings -> Control Panel.
ii. In the Control Panel dialog box, double-click the System icon.
iii. In the System Properties dialog box, click the Hardware tab.
iv. Click the Device Manager button.
v. Double-click the DVD/CD-ROM drives icon.
Your computer drives will appear.
Troubleshooting and FAQs B-4