Installing Live! Drive Ir; Your Live! Drive Ir - Creative Live! PLATINUM 5.1 Product Manual

Installing Live! Drive IR

Your Live! Drive IR

The front panel of your Live! Drive IR has these jacks, connectors and controls:
Optical SPDIF In/Out
connectors
Connects to digital audio
devices such as DAT and
MiniDisc recorders, via
optical input/output.
RCA SPDIF In/Out
jacks
Connects to digital
audio devices such as
DAT and MiniDisc
recorders, via RCA
input/output.
¼" Headphones jack
Allows you to connect to a pair
of high-quality headphones.
Your speaker output will be
muted when you connect the
headphones.
Headphones Volume Control
Controls the headphones output
volume.
¼" Line In 2/Mic In 2 jack
Allows you to connect to a
high-quality dynamic microphone
or audio device such as an electric
guitar, DAT, or MiniDisc player.
RCA Auxiliary In jacks
Connects to consumer equipment such as
VCR, TV and CD player, via RCA auxiliary
outputs.
Infrared Receiver
Lets you control your PC using the
RemoteCenter remote control.
Line In 2/Mic In 2 selector
(Microphone Gain Control)
To switch to Line In 2, turn the knob
anti-clockwise over the Line In 2/Mic
In 2 mode separator mark until a
"click" sound is heard. To switch back
to Mic In 2, turn the knob clockwise
over the separator mark until a "click"
sound is heard. To control the
microphone gain, continue to turn
clockwise.
MIDI In/Out connectors
Connects to MIDI devices
using the Mini
DIN-to-Standard DIN cable
provided.
Line In 2/Mic In 2 mode
separator mark
Product Guide 5