Step 3: Connect The Sound Blaster Audigy And Audigy Extension Cards - Creative Audigy Platinum eX Getting Started Manual

Step 3: Connect the
Sound Blaster
Audigy and Audigy
Extension cards
1. Using the AUD_EXT/Joystick cable and internal SB1394 cable, connect the cards
as shown in Figure 2-3.
2. Connect the power splitter cable to the Audigy Extension card.
Internal SB1394
cable
Sound Blaster Audigy card
1
Audigy Extension card
Figure 2-3: Connecting the Sound Blaster Audigy and Audigy Extension cards.
Black triangle on the cable*
J4
J3
2
To system power
supply unit
Power splitter cable
J2
Red-colored
wire*
1
AUD_EXT/Joystick
cable
*Alignment markers to assist
you in installing the hardware
Installing Hardware 2-2