Package Contents; System Requirements - Creative Sound Blaster Audigy2 Platinum User Manual

Package Contents

The items listed here may be
different in certain countries.
Use the AD_EXT cable with
the Audigy 2 Drive ONLY. Do
not attempt to use a
conventional IDE cable or any
other cable with the Audigy 2
Drive as that may cause
electrical shorts and permanent
damage to the Audigy 2 card
and Audigy 2 Drive, which will
void the warranty for this
product. Your computer may
potentially be damaged too.
System
Requirements
Sound Blaster Audigy 2
card
The following items are included with the Sound Blaster Audigy 2 Platinum package:
❑ Sound Blaster Audigy 2 card
❑ Audigy 2 Drive and IR remote control
❑ Joystick/MIDI bracket
❑ Internal SB1394/FireWire cable
❑ AD_EXT cable
❑ Digital CD audio cable
❑ Power splitter cable
❑ 2 Mini-DIN-to-standard-DIN adapters
❑ 3.5 mm minijack to 1/4" plug adapter
❑ 4 screws + shunt (for microphone selection)
❑ 2 AAA batteries for the IR remote control
❑ Sound Blaster Audigy 2 Installation and Applications CD
❑ Quick Start Leaflet
❑ User manual (on CD)
❑ Sound Blaster Audigy 2 Feature Showcase Demo CD
❑ Warranty (printed or on CD)
❑ Technical Support (printed or on CD)
❑ Genuine Intel
® Pentium ® II 350 MHz, AMD
❑ Intel, AMD or 100%-Intel compatible motherboard chipset
❑ Windows
98 Second Edition (SE), Windows Millennium Edition (Me), Windows 2000 Service Pack
®
2 (SP2) or Windows XP
® K6 450 MHz or faster processor
Introduction iii