Installing Hardware
What You Need
In addition, you will also need an
available PCI slot and another
adjacent available slot on your
computer.
Use the AD_EXT cable with
the Audigy 2 Drive ONLY. Do
not attempt to use a
conventional IDE cable or any
other cable with the Audigy 2
Drive as that may cause
electrical shorts and permanent
damage to the Audigy 2 card
and Audigy 2 Drive, which will
void the warranty for this
product. Your computer may
potentially be damaged too.
Before you begin installation, be sure that you have these:
Sound Blaster Audigy 2 card
Digital CD audio cable
Joystick/MIDI bracket
Phillips-head screwdriver
(not included)
Sound Blaster Audigy 2 Drive
Internal SB1394/FireWire
cable
Remote
Control
AD_EXT cable
Screws
Shunt
Installing Hardware 1-1