Creative Sound Blaster Audigy2 Platinum User Manual page 21

Click here or on any description in
the table to return to the main
diagram.
Table 2: Description of Jacks, Connectors and Controls.
Number
1 ¼" Line In 2/Mic In 2 jack
Connects to a microphone or audio devices such as electric guitars and DAT or
MiniDisc players.
2 Headphone Volume Control
Controls the headphones output volume. See "Adjusting volume-level of
Headphones and Microphone" on page 1-9.
3 ¼" Headphone jack
Connects to a pair of headphones using a 1/4" stereo plug or adapter. Your speaker
output is muted when you connect the headphones to the Audigy 2 Drive.
4 Coaxial SPDIF In/Out jacks
Connects to digital audio devices such as DAT and MiniDisc recorders, via RCA
input/output.
5 Optical SPDIF In/Out connectors
Connects to digital audio devices such as DAT and MiniDisc recorders, via optical
input/output.
6 Auxiliary 2 Line In jacks
Connects to consumer equipment such as VCR, TV and CD players, via RCA
Auxiliary audio outputs.
7 Infrared Receiver
Receptor for the Infrared commands from your IR remote control.
Description
Installing Hardware 1-7