Connecting External Consumer Devices - Creative Sound Blaster Audigy2 Platinum User Manual

Connecting
External
Consumer
Devices
You can use a 4-pole Digital
Video A/V cable (not included) to
connect Line Out 3 to available
centre, subwoofer and rear centre
channels.
Click any circled number in the
diagram for a description of the
item.
Dolby Digital Decoder/Amplifier
1
Discrete 6-channel Amplifier/
Speaker System
5
Additional information for advanced users:
For connection to Centre and Subwoofer channels using a 3.5mm (4 pole/stereo)-to-RCA cable or 3.5mm (4 pole)-to-RCA cable,
connect the white RCA jack to the Centre input and the yellow/orange RCA jack to the Subwoofer input of the amplifier.
Figure 1-17: Connecting external consumer devices to the Sound Blaster Audigy 2 card.
6
2
7
Sound Blaster Audigy 2 card
3
9
4
8
10
OR
Installing Hardware 1-25